The NavInc interfaces
allow for connecting audio/video sources to the
original navigation system.
The interface ensures that
an input is created on the original PCM
navigation system, on which an external video
source can be connected (e.g. DVD player, DVB-T
TV, iPod, etc.). The images will be displayed on
the navigation screen. The audio of the video
sources will be played in stereo through the
original audio system of the car.
The interface is equipped
with an external connection:
- Video input; for the
connection of a reversing camera.
Besides the interface
creates analog signals through CAN-BUS. With
this signals it is possible to control a
reversing camera or the power supply of an
external AV-source.
The following output
signals will be available:
+12V switched voltage (max
500mA)
+12V reversing signal (max
1A)
Features:
- Audio/Video input
- Camera input
- PAL/NTSC support
- CAN-BUS output signals
- CE-approved
- Plug & Play cable kit
- Extension of double
controls (DVD player + DVB-T) possible via
steering wheel controls and radio unit.
The following is provided in the set:
- NavInc AV-interface
IF-PO-PCM3x
- Cable kit
- Installation- and user
manual
- One year software
warranty
- Warranty
- Invoice
Product specifications
Voltage: 12V DC
Voltage-operating capacity:
10,5 – 14,8V DC
Standby current: >7 mA
Operating current: 120 mA
Power input: 1,8W
Temperature range: - 30°C
up to + 80°C
Weight: 95grs
Dimensions(W x H x D): 90
x 35 x 65mm
Additional information:
- Check at the tab
“compatibility” on top of this page if your
radio or navigation system is suitable for this
product.
- Automatic activation of
camera only possible on interface level.
- It is not possible to
connect an original DVB-T TV tuner and an audio/video
interface at the same time. The original DVB-T
TV tuner must be removed.
- Image retention while
driving possible with TV/DVD free module
TF-PO-PCM30 or TF-PO-PCM31.
Optional:
De NavInc AV-interface can
be extended with operating software which
enables to control the connected DVD player or
DVB-T tuner through the original steering wheel
and radio controls. See INTERFACE – operating
software:
Legal information:
The driver of the vehicle
should not be inferred from the motion images.
In many countries, watching movies while driving
is prohibited. Therefore we accept no
responsibility for material or personal injuries,
directly or indirectly, due to installation of
the interface modules.
Interface and Software basic information:
The NavInc interfaces are no navigation systems
or screens to replace the navigation system. The
NavInc interfaces enable the possibilities to
connect different Audio/Video sources to the
navigation system.
Manufacturers create
adjusted software and hardware versions, options
and enhancements which ensures that the
compatibility of the products cannot be
guaranteed 100%. Compatibility lists are based
on customer feedback and experiences and will
constantly be updated for optimal customer
support.
The functioning of the
interfaces may be influenced by software updates
from the manufacturer/dealers. In such cases we
will provide a software update for this
interfaces (not applicable for all products)
within one year after invoice date. The costs
for (de)-installation of the interface must be
paid by the customer and the interface must be
supplied to us.
Car manufacturers create
adjusted versions of software and updates
without having informed third parties about it.
We therefore recommend to not update the car if
not necessary.
In exceptional cases it is possible that the
interface is not accepted by the vehicle, even
after replacing the interface or software
updates. In such cases, we should looking for an
alternative.
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
911 Carrera
2011-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
911 Carrera cabriolet
2012-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Boxster
2009-2012
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM30
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Boxster
2012-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Cayenne E1
2008-2010
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM30
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Cayenne E2
2010-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Cayman
2009-2013
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM30
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Cayman
2013-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Macan
2014-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
P&P cable kit
Panamera
2009-201>
Plug & Play
Auto switch rear camera input
Retain original TV-tuner
Video In Motion
TF-PO-PCM31
Rear camera input
A/V input
A/V output
Signal
MOST
CVBS signal
Notes
Also tested with 2014 models / When OEM RSE
installed (PCM3.1) also 5x CA-FAK-05 needed /With
the latest PCM3.1 software it can be possible that
the "Traffic announcement (TA)" must be in OFF
position when the IF-PO-PCM3x is installed
*** Εάν
διαθέτει Εργοστασιακές Πίσω οθόνες απαιτήτε
να αποκτήσετε 5x CA-FAK-05 ''Δείτε Επίσης''
Στο τέλος τις σελίδας
*** Η
τελευταία έκδοση του PCM3.1 Software θα
πρέπει να απενεργοποιηθεί το "Traffic
announcement (TA)" must be in OFF position
when the όταν εγκατασταθεί Video In Motion
IF-PO-PCM3x
- Only in
combination with PCM3.0 & PCM3.1 navigation
systems
- Είναι
εφικτό να επιλέξετε από την οθόνη την
επιλογή εικόνας του Interface αλλά στο
PCM3.1 δεν είναι εφικτό να έχετε
εργοστασιακό χειρισμό των συσκευών που θα
προσθέσετε.
-Εάν το
αυτοκίνητο διαθέτει εργοστασιακό TV Tuner θα
πρέπει να απενεργοποιηθεί (να καταργηθεί) με
την εγκατάσταση του interface
-Η Κάμερα θα
λειτουργεί αυτόματα μόνο στο περιβάλον του
Interface
- Automatic
activation of camera is only possible on
interface level.
- Εάν
εγκαταστήσετε κάμερα του εμπορείου απαιτείτε
να αποκτήσετε CA-FA-02.''Δείτε Επίσης'' Στο
τέλος τις σελίδας
- Audio/Video
sources must support PAL/NTSC video signals.
- Για να
έχετε εικόνα εν κίνηση απαιτείτε να
αποκτήσετε Video In motion ανάλογα με την
εργοστασιακή πηγή που διαθέτετε TF-PO-PCM30
or TF-PO-PCM31. ''Δείτε Επίσης'' Στο τέλος
τις σελίδας
PCM3.0 navigation system:
PCM3.1 navigation system:
Προσοχή δεν είναι
συμβατό με τα παρακάτω συστήματα