With the Parkeasy set it is possible to mount
aftermarket rear and/or front parking sensors in combination with an
original radio system of Audi, Seat, Skoda and Volkswagen.
On the display of the original radio a graphical image will be displayed of
the parking sensor information. Besides the interface supports acoustic
information of the parking sensors. The interface makes use of parking
sensors which can be mounted behind the bumper.
*Zie tabblad "compatibiliteit"
Features:
# 8x flat PDC sensors or parking sensors included
# Optical display on the original radio screen
# CAN-BUS controlled
# OEM installation
# 3 different acoustic signals
# Adjustable sensitivity of the sensors
# Sensitivity of sensors from 0 up to 160cm
# Adjustable volume of acoustic signals
# CE & TUV certified
Activation
The parking sensors
become active as soon as the reversed gear is selected. An
activation signal will be heard and on the radio screen an image of
a car will be displayed.
As soon as there is an obstacle in the detection area, a beeping
sound will be heard and repeated in equal intervals. The obstacle
will also be showed on the radio screen. When the obstacle will be
approached, the intervals of the beeping sound will change as well
as the image on the radio screen. This depends on the zone the
obstacle is in.
De-activation
The parking sensors will be de-activated when
the reverse gear is de-selected.
The frond sensors will be de-activated automatically above 10 km/h.
Re-activation
-Front sensors will be activated again when
reverse gear is selected.
or
-By use of the “OK” button on the steering wheel pushing for 3
seconds or via external switch (optional)
Detection range
De standard values are:
C: 0 - 30 cm -- Constant beep
Z1: 30 - 65 cm -- Interrupted
beep fast
Z2: 65 - 115 cm -- Interrupted
beep normal
Z3: 115 - 160 cm -- Interrupted
beep slow
These values are adjustable via the service display.
Installation examples:
PDC sensor:
Parameters:
Via the parking module with service display
several parameters can be adjusted, such as:
Rear service display
-Volume of the buzzer
-Range middle sensors 120 – 180cm
-Range angle sensors 50 – 95cm
-Stop zone middle sensors 30 – 70cm
-Stop zone angle sensors 30 – 70cm
-Sensitivity of the sensors for towbar or fixed devices on the car
-Gear indicator: manual or automatic
Front service display
-Volume of the buzzer
-Range middle sensors 50 – 95cm
-Range angle sensors 50 – 95cm
-Stop zone middle sensors 30 – 50cm
-Stop zone angle sensors 01-99 pulses
-Adjustable activation delay
-Sensitivity of the sensors
Service display
The following will be supplied:
- PDC unit
- 4x sensors (external)
- CAN-BUS interface
- Buzzer
- Power cable
- Installation- and user manual
- Warranty
- Invoice
Extra information:
- Check compatibility with your car before
you order the interface at tab "Compatibility".
- Diameter for mounting parking sensor: 18mm / 22mm / 24mm
(adjustable with supplied fixtures)
- Ideal mounting height is 50cm - 60cm from the ground
- Distance between sensors 30cm - 70cm.
- Sensors are sprayable to match colour of the car.
Technische gegevens:
UNIT:
- Rated: DC12V/24V
- Range of operating voltage: 30V ~ DC9.6V
- Standby Current: <100 mA
- Operating current: <200 mA
- Operating temperature: -25 ° C ~ 80 ° C
- Storage Temperature: -30 ° C ~ 85 ° C
- Frequency: 40KHz ± 2 KHz
SENSORS:
- Range of operating voltage: AC90 ~ 130V pp
- Operating temperature: -25 ° C ~ 80 ° C
- Storage Temperature: -30 ° C ~ 85 ° C
- Operating Frequency: 40KHz ± 2 KHz
- Angle: Horizontal 120 ° - 60 ° Vertical
- Method of detection: Ultrasonic
Parkview:
- Rated: DC10V/16V
- Standby Current: 1 mA
- Operating current: 1 A
Compatibility!
ompatibility:
The interface is suitable for the
following OEM radio systems:
RNS-310
RCD-310
RNS-315
RCD-510
RNS-510
Columbus
Swing
MIB Entry
MIB Standard
MIB High 8" Testing
MMI
Remark:
- From other radio systems we do not have
test results
- Only in combination with car models which are displayed below
- Programming of diagnostics are necessary for correct working of
the interface
Images of suitable radio systems:
RNS-310
RCD-310
RCD-510
RNS-510
Swing
MIB Entry
MIB Standard
MMI
Car models:
The interface is suitable for the following models van Audi, Seat, Skoda and
Volkswagen in combination with suitable OEM radios: